Border/Wide Sashing Tute

I posted a picture of this border on my Facebook Crazy Horse Quilting page and was asked to provide instructions. So, here goes:

To get this:

Do this:

Measure the distance from one corner to the other and decide on the size of the diagonals. I believe mine were approximately 5"

Sew down one side and then...

Come back down the other side, making diamonds as you go. As you can see I stitched a line along the edge. It was necessary to make a complete demarcation to show where the diamonds stopped so that the corner design would be separate.

Below is a shot of the ruler I used and the placement to make the interior angled lines of the diamond. I didn't mark anything, I just used the marks on the ruler to make my lines end approximately 1/4" from the diamond points.

After making the angled inner diamond, I filled in the outside triangle with the lines. Again, I didn't measure and they aren't all the same; however, when you look at the overall effect, your eye will "self-correct" and you don't notice.

At the point of the next diamond, I filled in the inner lines and then continuedon with the vertical lines in the triangle.

This is what it looked like after completing the inner diamonds and the vertical lines on one side.

I was then able to come back, without starting/stopping, to finish the vertical lines on the opposite side. The best part about this was that if I got carried away and forgot to do an inner diamond (this happens when I daydream), I could fill it in on my way back and no one would ever know!

When you're finished, you have this:  

I was able to complete this design with four passes and didn't have to stop/start. I do think part of the reason this turned out looking so cool was the batting (wool) and the way the gold thread matched so well with the gold in the fabric. 

And that concludes today's tutorial. Hope it made sense!!!

Dory

Quilt Mock-up Tutorial

I asked Becca, and because she doesn't have a blog, she gave me permission to re-post her Mock-up Tutorial here. I'm not sure how much good this will do for most of you. The Quilt-Along file provided us with a drawing of the quilt to plan our colors.

QAL MOCKUP TUTORIAL

First thing is to go to the QAL blog and get the color chart; this is not the .pdf version.

Right click on the page and then click "save image as." Another box will pop up asking you to choose a file to put it in. I put mine in a new folder marked QAL Mockup so that I'd have it in one place as I added new blocks.

See mine here:

Now for the fun part: getting those pictures added. Once you figure it out, its like riding a bike. First, the pics must be resized. Open your Paint program (btw, every computer has a Paint program. Find yours by going to the Start menu--its the little globe in the lower left corner of your computer screen--and click "All Programs." Scroll down until you see the folder called "Accessories." Click that open and scroll down again until you see it--trust me, its there. Pin the Paint program to the task bar by right clicking. This causes another box to come up and you can check "Pin to Task Bar.") Now, open up that Paint program and let's get started.

Click the dark blue button.

It will open a box like this:

Click the Open File here and bring up the pic of your first block. It will look like this in Paint:

Its big, I know, but click the Resize button; it opens a box that looks like this:

Be sure that the dot next to "pixels" is clicked and change the top number (horizontal) to 100. The vertical number will change respectively. Your once very large block now looks like this:

Now here's the fun part: Click the selection block little arrow and then click the rectangle selection. Next, move your cursor over your block from the upper left corner and drag to the lower right corner--like this:

A dotted line will be around your block. In the upper left corner of the Paint program, click the "File Save" button. A box will come up and crop your picture. You'll see that the dotted line is gone and now you can save this to your newly created QAL Mockup file.

Click the dark blue button in the upper left corner and hit "Save As." A list will come up like this:

Make sure you hit .jpg; it will make it easier to use your pic when placing it on your mockup. Now lets add these pics to the mockup!

Open your Paint program again and click the dark blue button in the upper left corner. Then open the folder and get the mockup from your saved file.

Click the box for the first block we made in the upper left corner and drag to the lower right; this will select the block we want to fill. Then click paste (upper left) and click the arrow like this:

Paste will open up a box so that you can find your newly cropped pic in your QAL Mockup file. You can position it to center or un-check the horizontal/vertical option to play with the dimensions so that it will fit properly.

Although it does seem a bit complicated, it really isn't. Just a bunch of clicking in the right places. (Or so Becca tells us!!)

* * * * *

Thanks, Becca for letting me post this. I hope those of you reading can use this.